HORICO: Diamond H 113 053

You can cover the retentions on your model cast work with this light-curing powder opaque system.

The adhesive system for secure bonding of zirconium dioxide frameworks with titanium bases. Easy application and high bond strength leave hardly anything to be desired.

You can use this set to veneer your crowns and bridges with liquid composite. You will be delighted with the great workability and aesthetic results.

Aesthetic system for your plastic temporary restorations: Biocompatible ** - Non-toxic ** - Reduced plaque accumulation ** - Fluorescent

Simple temperature regulation. Consistency of dipping wax and lining thickness is determined by temperature setting, melting period is 15 minutes, with wax temperature tolerance of ±4°C.

Simple temperature regulation. Consistency of dipping wax and lining thickness is determined by temperature setting, melting period is 15 minutes, with wax temperature tolerance of ±4°C.

Thermo knife is an electrical device for waxing up in dental laboratories. It is easy to carry as it is small and very compact, it is also very user friendly with its ergonomic design, convenient and efficient. The thermo knife is equipped with LED screen of high luminance. The lifespan of the product is long. Mechanically regulated temperature in range 50°C - 200°C. T, precise temperature is discharged as temperature variation is small due to the safe supply of voltage. It is possible to use various different tips, there are 2 tips delivered with the Thermo knife. It is suitable for use in dental laboratory and in goldsmith’s production.

High quality polishing paste for dry pre-polish and polishing of different dental alloys.

Kunststoffe - ACRYLICS - RESINE - ACRILICO

ACRYLICS Mattglanz Silky Lustre Eclat Stain Brillo Satinado

ACRILICO

RESINE Mattglanz Silky Lustre Eclat Stain Brillo Satinado

Especially develeoped for dry working on zircon-oxide, aluminum oxide and glass ceramics, heat-resistant For zirconia, glass ceramics, ceramics, metals

Especially develeoped for working on zircon-oxide, aluminum oxide and glass ceramics. Minimal heat development and consequently usable without water cooling. Hosynth abrasive stones have a very high material removal

The Bite Tray impression tray and holder The Bite Tray impression tray made of cardboard and gauge is ideal for all bite impressions and for impression of single crown or inlay preparations giving an impression of the preparation of the teeth next to it and the bite against it. Most standard impression materials are suitable for the Bite Tray. The new stainless steel Holder for Bite Trays will greatly facilitate the insertion of the Bite Tray in the mouth. The Holder will stabilize the Bite Tray and produce a better and more precise impression. How to use this product

Crosspin® developped by Harald Nordin SA does improve precision and facilitate work with removable model sections. Unique: allows easy removal of model section to be worked upon and makes repositioning with absolute precision possible. Advantage: simplifies work for the dental Technician and offers absolute precision. Crosspin® has a double profile; a cylindrical part which is introduced in the “tooth part” of the model and a cross-shaped part which with its sleeve is introduced in the “base part” of the model. The sleeve will stay in the base part and the desired section can thus be removed and replaced with absolute precision. With Crosspin® you will save time, gain precision and increase the quality of your final work: – The removable section can always, after multiple removals, be returned to its initial position with absolute precision. – You only need one pin per section. – The depth of the model-former (to cast the base) is adapted to the length of the pins so you will have direct access to the bottom of the pins from the bottom of the base which makes extraction much easier. – The base is already shaped and needs no trimming. – You will also use much less plaster and have a thinner model which is easier to mount in the articulator. – Finally, a better job made easier with more precision and less cost. Swiss Quality signed Harald Nordin SA.

Orthodontic Self-Curing Resin and Liquid Formulated with the most vibrant, attractive and complete color line available. For development of orthodontic and orthopedic retainers Fine polymer for a better finish Variety of presentations 20 colors

stonishing shine for all kinds of acrylics, resin and flexible partials.

for ceramics

Diamonds for separation.